Flashing From USB Thumb Drive
- DOWNLOAD FILE
- UNZIP FILE
- SAVE UNZIPPED FILE TO MEMORY STICK
- PRESS MENU
- INSERT MEMORY STICK INTO FRONT USB PORT
- CHOOSE INSTALLATION
- SCROLL DOWN AND CHOOSE USB MASS STORAGE
- PRESS OK
- SCROLL DOWN AND CHOOSE CORRECT FILE
- PRESS RED BUTTON AND FILE WILL LOAD
- DON'T TOUCH FILE WILL LOAD AND MACHINE WILL REBOOT ON ITS OWN
Dish Network Settings
- ! YOU MUST BE A PAID SUBSCRIBER. NEVER PROGRAM FOR CHANNELS YOU ARE NOT PAYING FOR! IT IS ILLEGAL TO PIRATE SATELLITE TELEVISION!
Settings:
LNB power ON LNB type OCS-DP LNB frequency 11250 Transponder 110=12224, 119=12239 22khz OFF Search option All Network search ON Diseqc 110=2, 119=1 Motor Disable Legacy switch OFF
You have to set your antenna seting correctly for your dishpro twin OCS DP, diesq port 1 119, diesq port 2 110. Do not do blind scan on circular sats auto scan only.
FAQ
- Q: Some channels are locked, namely, the adult content channels.
- A: Go into parent control and unlock the xxxx channels. Go to system settings, parental control, enter 0000, unlock adult channels and switch ratings lock to not used.
- Q: What are all the settings I should check to make sure nothing is locked out?
- A: Go to menu, sistem settings, parentel control, enter "0000", and check if: receiver lock is "OFF", menu lock is "OFF", scramble lock is "OFF", adult channel lock is "OFF", rating lock is "NOT USED".
- Q: I cant get anything in the EPG to show, the programming guide is basically blank. How do I get the EPG to work?
- A: For Dish Network goto channel 239 and let it stay there for about two minutes. This works if you have the settings for 7-day EPG and Stand-By EPG set to ON. For Bell Satellite use channel 410. Another method is to turn the EPG Auto Update ON in the menu and then turn receiver off with the remote for 5 minutes and it will show full epg.
- Q: My audio is fading out or gone, how do I get it back?
- A: Go into the settings and turn off Dolby Sound.