Difference between revisions of "Sonicview SV-4000 FTA Receiver"
From Free Knowledge Base- The DUCK Project: information for everyone
m |
m |
||
| Line 1: | Line 1: | ||
| − | |||
== Flashing From USB Thumb Drive == | == Flashing From USB Thumb Drive == | ||
| − | # | + | # Save the bin file to your USB Thumb Drive |
| − | # | + | # Power on the Sonicview receiver |
| − | # | + | # Using the remote, press the MENU button |
| − | + | # Insert Thumb Drive in the front USB port | |
| − | # | + | # Select INSTALLATION from the menu |
| − | # | + | # Scroll down and select USB MASS STORAGE as the source |
| − | # | + | # Press OK on the remote |
| − | # | + | # Now select the correct bin from the list (there may only be one) |
| − | # | + | # Press the RED button on the remote to start the flash process |
| − | # | + | # It is important that you DO NOT DISTURB the unit and wait patiently for the flash process to complete |
| − | # | + | # The receiver will reboot itself after a few minutes. |
== Dish Network Settings == | == Dish Network Settings == | ||
Revision as of 11:20, 28 March 2008
Flashing From USB Thumb Drive
- Save the bin file to your USB Thumb Drive
- Power on the Sonicview receiver
- Using the remote, press the MENU button
- Insert Thumb Drive in the front USB port
- Select INSTALLATION from the menu
- Scroll down and select USB MASS STORAGE as the source
- Press OK on the remote
- Now select the correct bin from the list (there may only be one)
- Press the RED button on the remote to start the flash process
- It is important that you DO NOT DISTURB the unit and wait patiently for the flash process to complete
- The receiver will reboot itself after a few minutes.
Dish Network Settings
- ! YOU MUST BE A PAID SUBSCRIBER. NEVER PROGRAM FOR CHANNELS YOU ARE NOT PAYING FOR! IT IS ILLEGAL TO PIRATE SATELLITE TELEVISION!
Settings:
LNB power ON LNB type OCS-DP LNB frequency 11250 Transponder 110=12224, 119=12239 22khz OFF Search option All Network search ON Diseqc 110=2, 119=1 Motor Disable Legacy switch OFF
You have to set your antenna seting correctly for your dishpro twin OCS DP, diesq port 1 119, diesq port 2 110. Do not do blind scan on circular sats auto scan only.
FAQ
- Q: Some channels are locked, namely, the adult content channels.
- A: Go into parent control and unlock the xxxx channels. Go to system settings, parental control, enter 0000, unlock adult channels and switch ratings lock to not used.
- Q: What are all the settings I should check to make sure nothing is locked out?
- A: Go to menu, sistem settings, parentel control, enter "0000", and check if: receiver lock is "OFF", menu lock is "OFF", scramble lock is "OFF", adult channel lock is "OFF", rating lock is "NOT USED".
- Q: I cant get anything in the EPG to show, the programming guide is basically blank. How do I get the EPG to work?
- A: For Dish Network goto channel 239 and let it stay there for about two minutes. This works if you have the settings for 7-day EPG and Stand-By EPG set to ON. For Bell Satellite use channel 410. Another method is to turn the EPG Auto Update ON in the menu and then turn receiver off with the remote for 5 minutes and it will show full epg.
- Q: My audio is fading out or gone, how do I get it back?
- A: Go into the settings and turn off Dolby Sound.
