John Deere X320 Tractor Mower: Difference between revisions
No edit summary |
mNo edit summary |
||
| (11 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Engine Oil | Ride-On Lawn Mower that is said to be a definite step up from the L1xx or D1xx series. Manufactured from 2006 to 2015 there were equipped with 22HP Kawasaki 675cc 2-cyl gasoline. These were built in Horicon, Wisconsin and had original price at $4,099 in 2010. Comes standard with 48" mid-mount mower deck. | ||
[[Image:JDx320.jpg]] | |||
X320 Variants: | |||
*X320 two-wheel steer | |||
*X324 four-wheel steer | |||
The model X320 has no power steering, but it doesn't need it. The steering offers a super sharp turning radius. It also has no hydraulic lift, but with the foot lift, you don't need it. This is one less complication that you can avoid having to service. The deck lifts with ease using the foot pedal. Engine is the 20 hp Kawasaki twin cylinder engine that has run flawlessly. It has the K58 transmission, which is a cut above the K46. | |||
===Engine Oil=== | |||
The following John Deere oils are preferred: TURF-GARD | The following John Deere oils are preferred: TURF-GARD | ||
* 30 weight full synthetic | * 30 weight full synthetic | ||
Transmission | ===Transmission Fluid === | ||
* PLUS- 4 | * PLUS- 4 | ||
Deck Removal | ===Deck Removal=== | ||
remember to lock the deck height in the FORWARD position. You typically lock in in the back or depressed position to bring hte deck all the way up. However, to remove pins and deck you need to have the lever all the way up as far as it will go and it also locks into this position. This prevents the deck holding arms below from retracting once the pins are removed as they are spring loaded. | remember to lock the deck height in the FORWARD position. You typically lock in in the back or depressed position to bring hte deck all the way up. However, to remove pins and deck you need to have the lever all the way up as far as it will go and it also locks into this position. This prevents the deck holding arms below from retracting once the pins are removed as they are spring loaded. | ||
Mower Blade Removal | ===Mower Blade Removal === | ||
bolt on each of the 3 blades is 18mm and standard thread (not reverse thread). Turn counter clockwise to loosen and remove blade. | bolt on each of the 3 blades is 18mm and standard thread (not reverse thread). Turn counter clockwise to loosen and remove blade. | ||
===Belt=== | |||
[[Image:jd-x320-belt.jpg]] | |||
===Clutch=== | |||
This mower uses the Warner Electric MagStop Residential, TG-2000 and Commercial Clutch/Brake. The | This mower uses the Warner Electric MagStop Residential, TG-2000 and Commercial Clutch/Brake. The | ||
MagStop name comes from the permanent magnet brake (magnetic stopping) rather than conventional spring activated mechanical brakes. | MagStop name comes from the permanent magnet brake (magnetic stopping) rather than conventional spring activated mechanical brakes. | ||
* 5219-127 IS A REPLACEMENT FOR PART NUMBER 5219-62 | * 5219-127 IS A REPLACEMENT FOR PART NUMBER 5219-62 | ||
[[Image:warnermagstop01.jpg]] | [[Image:warnermagstop01.jpg]] | ||
* https://www.warnerptodirect.com/shop/pto-clutches/5219-127 | |||
Function Clutch / Brake Voltage 12 VDC Rated Torque (lb-ft) 125 | |||
Rotation CCW Current Draw (Amps) 4.23 Resistance (Ohms) 2.84 | |||
Connection Type integral Pulley/Flange OD (in) 5.2 Bore Diameter (in) 1 | |||
Mounting Standard Weight (lbs) 11.6 D-drive Number 807-0201 included with this clutch/brake | |||
Cable Accessory not included Manufacturers Part Numbers AM141536, AM134397 Replaces 5219-62 | |||
===Starter Solenoid=== | |||
John Deere Original Equipment Starter Motor #MIU12537 | |||
===Reverse Blade Disengage=== | |||
Dangerous Safety Overrides that you should not do (but I did): | |||
[[Image:JD-safety-override01.jpg]] | |||
[[Category:Tangible Product]] | |||
Latest revision as of 12:28, 15 July 2025
Ride-On Lawn Mower that is said to be a definite step up from the L1xx or D1xx series. Manufactured from 2006 to 2015 there were equipped with 22HP Kawasaki 675cc 2-cyl gasoline. These were built in Horicon, Wisconsin and had original price at $4,099 in 2010. Comes standard with 48" mid-mount mower deck.
X320 Variants:
- X320 two-wheel steer
- X324 four-wheel steer
The model X320 has no power steering, but it doesn't need it. The steering offers a super sharp turning radius. It also has no hydraulic lift, but with the foot lift, you don't need it. This is one less complication that you can avoid having to service. The deck lifts with ease using the foot pedal. Engine is the 20 hp Kawasaki twin cylinder engine that has run flawlessly. It has the K58 transmission, which is a cut above the K46.
Engine Oil
The following John Deere oils are preferred: TURF-GARD
- 30 weight full synthetic
Transmission Fluid
- PLUS- 4
Deck Removal
remember to lock the deck height in the FORWARD position. You typically lock in in the back or depressed position to bring hte deck all the way up. However, to remove pins and deck you need to have the lever all the way up as far as it will go and it also locks into this position. This prevents the deck holding arms below from retracting once the pins are removed as they are spring loaded.
Mower Blade Removal
bolt on each of the 3 blades is 18mm and standard thread (not reverse thread). Turn counter clockwise to loosen and remove blade.
Belt
Clutch
This mower uses the Warner Electric MagStop Residential, TG-2000 and Commercial Clutch/Brake. The MagStop name comes from the permanent magnet brake (magnetic stopping) rather than conventional spring activated mechanical brakes.
- 5219-127 IS A REPLACEMENT FOR PART NUMBER 5219-62
Function Clutch / Brake Voltage 12 VDC Rated Torque (lb-ft) 125 Rotation CCW Current Draw (Amps) 4.23 Resistance (Ohms) 2.84 Connection Type integral Pulley/Flange OD (in) 5.2 Bore Diameter (in) 1 Mounting Standard Weight (lbs) 11.6 D-drive Number 807-0201 included with this clutch/brake Cable Accessory not included Manufacturers Part Numbers AM141536, AM134397 Replaces 5219-62
Starter Solenoid
John Deere Original Equipment Starter Motor #MIU12537
Reverse Blade Disengage
Dangerous Safety Overrides that you should not do (but I did):
