Difference between revisions of "Linux Disk Utilities"

From Free Knowledge Base- The DUCK Project: information for everyone
Jump to: navigation, search
(Example 3: Disk Utility, Check Filesystem)
 
(One intermediate revision by one user not shown)
Line 21: Line 21:
 
=== Example 2: fsck on any Linux system ===
 
=== Example 2: fsck on any Linux system ===
  
The File System Check (fsck) is a command line utility that can be used to check the condition of the hard drive.
+
The File System Check (fsck) is a command line utility that can be used to check the condition of the hard drive.  
  
=== Example 3: Disk Utility, Check Filesystem ===
+
fsck -f /dev/hdaX
 +
 
 +
You should not use fsck on a mounted drive.  In general it is not safe to run fsck on mounted filesystems. The only exception is if the -n option is specified, and -c, -l, or -L options are not specified. However, even if it is safe to do so, the results printed by fsck are not valid if the filesystem is mounted.
 +
 
 +
Running fsck on a mounted file system is not recommended because logically, it will be trying to analyze for inconsistencies on effectively a changing drive. The action of modifying the filesystem means that anything that has been analyzed will have to be rechecked again and again, because it just keeps changing.
 +
 
 +
You can force an fsck on most linux distributions for a mounted drive, while it is not yet mounted, during the next reboot.
 +
sudo touch /forcefsck
 +
shutdown -r now
 +
 
 +
Or, the shutdown command with parameters that will force a fsck check on reboot
 +
shutdown -rF now
 +
 
 +
That says "reboot and fsck before mounting!"
 +
 
 +
=== Example 3: Disk Utility, Check Filesystem and GParted ===
  
 
This is a GUI alternative to fsck.
 
This is a GUI alternative to fsck.
  
{{:Sparse Entry}}
+
Disks 3.4.1 (aka palimpsest, gnome-disk-utility, or Disk Utility) underwent a huge UI change.  Users of Ubuntu 12.04 Precise will not experience this issue because Disks 3.4.1 is only available via PPA or in the next Ubuntu release, 12.10 Quantal.
 +
 
 +
Disks 3.3+ is a complete rewrite of the old gnome-disk-utility (aka Palimpsest). It no longer appears to include an option to check filesystems
 +
 
 +
Use GParted to check filesystems instead. Select the partition you want to check, click on Partition...Check in the menu
 +
 
 +
 
  
 
[[Category:Computer_Technology]]
 
[[Category:Computer_Technology]]
 
[[Category:Linux]]
 
[[Category:Linux]]

Latest revision as of 22:23, 25 February 2014

Linux Disk Utilities have come along way over the years. Here we will discuss some different disk types and how to manage under some various linux flavors. A primary focus will be on disk health, such as the equivalent to performing a 'scandisk' for Linux users.

UltraATA disks have S.M.A.R.T. technology. These disks perform self-monitoring, analysis, and reporting by internally monitoring their own operation. Older IDE disks required software tools or system tools to perform such operations.

Example 1: Disk Health on Linux Mint system

In this example we are on a Linux Mint 16 "petra" machine with a 160GB SATA drive.

  1. Goto: Menu, Control Center, Hardware, Disks
  2. In the Devices pane on the left select the disk
  3. Click on the "gear" icon in the upper right of the Disks dialog box and a drop down menu appears
  4. choose "SMART Data & Self-Tests..." from that menu

These instructions should be close to identical on Ubuntu, Debian, and other similar distributions.

The disk utility lets you see the model, serial number, firmware, and the overall health assessment of the hard disk, as well as whether a SMART system is enabled on the hard disk.

The ‘Run Self-test’ button lets you initiate a short,extended, or a conveyance self-test on the hard disk.

The ‘Attributed section’ lets you see the errors and self-test information.

Example 2: fsck on any Linux system

The File System Check (fsck) is a command line utility that can be used to check the condition of the hard drive.

fsck -f /dev/hdaX

You should not use fsck on a mounted drive. In general it is not safe to run fsck on mounted filesystems. The only exception is if the -n option is specified, and -c, -l, or -L options are not specified. However, even if it is safe to do so, the results printed by fsck are not valid if the filesystem is mounted.

Running fsck on a mounted file system is not recommended because logically, it will be trying to analyze for inconsistencies on effectively a changing drive. The action of modifying the filesystem means that anything that has been analyzed will have to be rechecked again and again, because it just keeps changing.

You can force an fsck on most linux distributions for a mounted drive, while it is not yet mounted, during the next reboot.

sudo touch /forcefsck
shutdown -r now

Or, the shutdown command with parameters that will force a fsck check on reboot

shutdown -rF now

That says "reboot and fsck before mounting!"

Example 3: Disk Utility, Check Filesystem and GParted

This is a GUI alternative to fsck.

Disks 3.4.1 (aka palimpsest, gnome-disk-utility, or Disk Utility) underwent a huge UI change. Users of Ubuntu 12.04 Precise will not experience this issue because Disks 3.4.1 is only available via PPA or in the next Ubuntu release, 12.10 Quantal.

Disks 3.3+ is a complete rewrite of the old gnome-disk-utility (aka Palimpsest). It no longer appears to include an option to check filesystems

Use GParted to check filesystems instead. Select the partition you want to check, click on Partition...Check in the menu