View source for Tytera TH-9000D

[[File:TYT_TH-9000d_01.jpg]]

<big>
Please note, part of this page is missing.  However, operation is the same as [[TYT TH-9000D 1.25M Transceiver]] 
</big>

200 Alphanumeric Channels, Full Keypad Microphone. Cool-Blue Display Backlight. Includes mounting bracket & fused power Cable.
Features 3 Selectable Power levels, DTMF, Keypad lock, Scan modes & more

front panel controls:

      short press                                 long press
 ------------------------------                   ------------------------------
 [F ] select memory channel for save
 [P1]                                             clone
 [P2] open squelch "monitor"                      display operating voltage toggle
 [x ] power
 [P3] VFO/memory                                  scan
 [P4] tune step                                   offset -,+,none, and freq
 [P5] tone squelch (disable, tone, tsql, dcs)     chan memory ?

hand mic:

* adjust transmit power: press [FUNC] then [0] to toggle though three transmit power levels. 


==basic usage==

===VFO===
Short press P3 to switch between VFO and Memory channel.

On the mic you can press the VFO button on the upper right.
===CTCSS===
Short press P5 to cycle though various tone, tone squelch, etc...
===repeater offset===
To turn on or off repeater offset push and hold P4
* push and hold down once - offset frequency.  typically this is 1.600 for 1.25 repeaters
* push and hold down again - changes + or - offset shift
===program channel===
Select a VFO frequency

and


[[Category:Electronics]]
[[Category:Radio]]
[[Category:Ham Radio]]
[[Category:2-Way Radio]]
[[Category:Tangible Product]]